Best brakes? - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'94 to '04 -- The SN95 Mustang

Best brakes?

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Best brakes?
Darkman270 Journeyman Posts: 13 From: Pensacola Florida Registered: Aug 2002	posted 02-15-2004 07:26 PM Which Mustang Calipers are the best as far as stopping power and availability? I am adapting them to a Mus II spindle for my 1957 F100. Charles in Pensacola FL [This message has been edited by Darkman270 (edited 02-15-2004).] IP: Logged
hotstang Gearhead Posts: 347 From: Murfreesboro, Tn USA Registered: Jun 99	posted 04-01-2004 12:24 PM well if oy are wanting ot go with a stock type setup. the 99-04 GT calipers are Great PBR products. they will stop jsut as fast as the cobra with the 13" rotors, but the corbra's will not fade as bad when they get hot. IP: Logged
Darkman270 Journeyman Posts: 13 From: Pensacola Florida Registered: Aug 2002	posted 04-04-2004 02:03 PM Thanks. Are there any differances between the 99 - 04 GT. ------------------ Charles in Pensacola Fl. Restomodding at the speed of a slow sick snail!!! 1957 F100 312 auto with OEM57 McCulloch supercharger 1970 Mach 1 351C 4 spd 1969 Mach 1 428 CJ auto IP: Logged
hotstang Gearhead Posts: 347 From: Murfreesboro, Tn USA Registered: Jun 99	posted 04-21-2004 09:19 PM there is no differance in the 99-03, not sure about the 04 but I think they are the same.. If you have 17" wheels you can get a good deal on the cobra kit from http://www.speedconcepts.net/Cobra_Bullitt%20brake%20conversion%20kits.htm IP: Logged
hotstang Gearhead Posts: 347 From: Murfreesboro, Tn USA Registered: Jun 99	posted 04-21-2004 09:20 PM BTW, you may want to look into 99-04 spindles 2. they are much much better IP: Logged
Scott G Journeyman Posts: 72 From: Chattanooga, TN USA Registered: Mar 2003	posted 04-22-2004 08:40 PM I think 94-95 spindles were one type, and all 96+ spindles were the revised. I know a that in 96 they went to a different steering arm and track width on the spindle, and I don't think they changed it again in 99. Scott IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]