Brought to you in part by:

.

Tools & Supplies by Eastwood

  Mustangsandmore Forums
  '94 to '01 -- The SN95 Mustang
  Where is the cam on the 4.6??

Post New Topic  Post A Reply
profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone! next newest topic | next oldest topic
Author Topic:   Where is the cam on the 4.6??
Amherst
Gearhead

Posts: 246
From: Amherst, WI, USA
Registered: Aug 2000

posted 07-10-2001 10:49 PM     Click Here to See the Profile for Amherst   Click Here to Email Amherst     Edit/Delete Message   Reply w/Quote
You can tell I am new to the 4.6. Just when I thought I understood the windsor family, now I have to figure out the mod family!! Could someone please explain the difference between a motor like the 289, the sohc 4.6 I have, and the 4.6 dohc? Is the cam on top of the valvetrain? If there is a cam for each head on the 2V sohc, then why is it called single overhead cam? Wouldn't that mean only one cam for the motor? I'll just stop pulling my hair out, take a deep breath, and let one of use' guys' fill me in. Thanks in advance for the most basic 4.6 question ever!!!

IP: Logged

Moneypit
Gearhead

Posts: 83
From: Sacramento CA
Registered: Jun 99

posted 07-11-2001 04:32 PM     Click Here to See the Profile for Moneypit     Edit/Delete Message   Reply w/Quote
Wow, suprised no one has answered this yet. Here's my 2 cents on the topic.

The 289 is an Overhead Valve (OHV) type engine. One cam in the middle of the block that operates all the valves via lifters, pushrods and rocker arms.

The 4.6 SOHC has one cam on top of each head (total of two cams) above the valves that operates both intake and exhaust valves via followers. 1 cam per head = SOHC.

The 4.6 DOHC has two cams on the top of each head (total of 4 cams) above the valves . One operates the intake valves the other the exhaust valves again via followers. 2 cams per head = DOHC.

This is my understanding of the matter but since I'm no mechanic it may not be entirely correct.

IP: Logged

IIGood
Moderator

Posts: 1813
From: Arnold, MD, USA
Registered: Jun 99

posted 07-11-2001 04:53 PM     Click Here to See the Profile for IIGood   Click Here to Email IIGood     Edit/Delete Message   Reply w/Quote
This is something I've kinda wondered too.

More importantly, how are the OHCs driven? I know how the OHV cams are driven...one of the timing sprockets (?) is connected to the cam, which turns...is it kinda the same thing for the OHCs? A chain or belt runs up to each head to turn the cams?

------------------
Frank S.----MCA Member 40390
'99 Mustang coupe
'77 Ghia--"II Good"
'76 Cobra--project

IP: Logged

pthornton
Gearhead

Posts: 485
From: Austin, TX USA
Registered: Jun 99

posted 07-11-2001 07:05 PM     Click Here to See the Profile for pthornton   Click Here to Email pthornton     Edit/Delete Message   Reply w/Quote
Picture is worth a thousand words.

IP: Logged

IIGood
Moderator

Posts: 1813
From: Arnold, MD, USA
Registered: Jun 99

posted 07-11-2001 07:07 PM     Click Here to See the Profile for IIGood   Click Here to Email IIGood     Edit/Delete Message   Reply w/Quote
Yeah, you aren't kidding. The first ones that come to mind are, "What the...??"

------------------
Frank S.----MCA Member 40390
'99 Mustang coupe
'77 Ghia--"II Good"
'76 Cobra--project

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2002, Steve LaRiviere


Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[About M&M][Acronym Guide][Calendar of Events][Chat Room][Classified Ads] [Links]

[Members' Photos] [Technical Articles][Ford Parts Number Deciphering

[ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]