In between the MAF and throttle body question

Brought to you in part by:

Mustangsandmore Forums

'94 to '03 -- The SN95 Mustang

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author

Topic: In between the MAF and throttle body question

Amherst
Gearhead

Posts: 255
From: Amherst, WI, USA
Registered: Aug 2000

posted 07-08-2001 12:09 PM

I am not sure what you would call that rubber tube that connects the two, but was wondering if they make aftermarket ones. I am ordering a densecharger tomorrow, and have already removed the maf post and polished that out. The purpose of all these induction changes I assume is to create flow and reduce resistance. Has anyone looked down the rubber tube that I am taking about? I understand the thing has to bend, but the thing looks like a waffle griddle!! In my limited knowledge, I would think a smooth interior surface would flow much better than the uneven griddle surface. I have seen in some of the blower kits and even the cold air kits that they include a new tube that is smooth on the inside. Does anyone know where we can get just that piece, and am I on the right line of thought in wanted to junk the stock one? A 15.3 1/4 mile just isn't acceptable!!!!!

IP: Logged

71ragtop
Gearhead

Posts: 2459
From: Atlanta, GA
Registered: May 99

posted 07-09-2001 02:40 PM

I know that you can get a new tube in one of the cold air induction systems from MAC and a couple others. Whether they sell them separate or not I do not know. The densecharger should help you some. Look at the gains you get from that before you decide to replace that other tube.

Mike

IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Acronyms][Calendar][Chat][Classifieds] [Links] [Members' Pics] [Tech] [ Mustangsandmore.com Bookstore] [Advertise on Mustangsandmore.com] [Mustangsandmore.com T-Shirts]