Brought to you in part by:
NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.
Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.
Topic: Starter Application ??
From: So. Fl.
Registered: Aug 2000
posted 10-31-2006 08:47 AM
So my engine is an 89 HO and have an AOD. Using the 165 50 oz flexplate, what starter should I ask for? Am going carb so have the original '68 underdash wiring. would like to avoid the later starters with soleonoid on top.
From: Lyons, IL, USA
Registered: May 99
posted 11-02-2006 07:46 PM
I use the M-11000 B-50 FRPP units 90% of the time Pete.
If I get a bucks down customer I will occasionally substitute a Napa new unit part #NNE
Co-Administrator and Moderator
NHRA/SRA member and licensed Superstock driver
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,'04 &'05
First NHRA & IHRA 289 automatic Superstock Mustang in the TENS 06-99
First SS/MA in the TENS 04-03
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
The Barry of BarrysGrrl
Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
Contact Us | Mustangsandmore Front Page
Copyright 2006, Steve LaRiviere. All Rights Reserved.
Ultimate Bulletin Board 5.47d