|
Author
|
Topic: 347 back to machine shop
|
Tom G
Gearhead Posts: 1069
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 08-07-2006 10:21 PM
 
347 is going back to a reputable machine shop. Machinist said to bring both set of balancers and flywheels. I should have it out by wed . He is going to dissassenle check everything balance it then reaasemble for a decent price. Should hve it back inside 2 weeks.
Thanks to 7DMach (RAY) for the referral.
Ray thanks again. Ken at L&M engines was real nice guy to talk to and reasonable too.
Tom------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 Holley DP Crane 1.7 roller rockers, Performer Nitrous, ceramic headers WC T5, cable clutch MagnaFlow SS kit W/X Pipe 3.89 9". SSBC 4 piston frdisc Clearwater Aqua, Vintage 40 series 16X8 215 front 255/50 drag radials 308 RWHP@5800rpm 300 tq NA 385rwhp 380 w 75 shot 13.11 @111mph
88 GT (FiveOfastback's ride)347 forged internal Twisted wedge Comp 274 HR Track Heat, BBK headers X pipe Gforce ? RWHP ? RWTQ Red and Silver New Project 69 Boss 302 Acapulco Blue
|
Tom G
Gearhead Posts: 1069
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 09-01-2006 10:08 PM
Back from shop in the car and tuned, it now needs more airflow and bigger injectors. Motor was out of balance by 11oz on rear of crank. Motor smooth now after a chip tune. 352 rwhp 393 rwtq I gotta build me a stroker for the 67------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 Holley DP Crane 1.7 roller rockers, Performer Nitrous, ceramic headers WC T5, cable clutch MagnaFlow SS kit W/X Pipe 3.89 9". SSBC 4 piston frdisc Clearwater Aqua, Vintage 40 series 16X8 215 front 255/50 drag radials 308 RWHP@5800rpm 300 tq NA 385rwhp 380 w 75 shot 13.11 @111mph
88 GT (FiveOfastback's ride)347 Twisted wedge custom HYD roller 565 lift 182 duration Track Heat, BBK headers X pipe Gforce ? RWHP ? RWTQ Red and Silver New Project 69 Boss 302 Acapulco Blue
| |
