85 302 Help - Mustangsandmore Forum Archive

Brought to you in part by:

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

'79 to '93 -- The Fox Mustang

85 302 Help

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: 85 302 Help

65whitestang
Gearhead

Posts: 111
From: Eastern,CT
Registered: Jun 2006

posted 06-04-2006 06:47 PM

I have a 85 302 motor that I need a harmonic balancer and flywheel for. I know they need to
be the 50oz ones. I also need the flywheel to fit and 11" clutch. I found these parts at Summit Racing.
Flywheel RAM-1506
Harmonic SUM-163302
Looks like the balancer will fit my early three bolt pulley I am trying to use. Does anyone have a suggestion for any other brands,parts source ect...other than what I found. Also does anyone know if an early timing cover with the cast pointer will work on my 85 era 302 block or should I switch this over to a later model one? Trying to retain the early look on the motor the best I can.

Bill

quick50stng
Journeyman

Posts: 99
From: Bethlehem,GA. USA
Registered: Sep 2004

posted 06-16-2006 03:41 PM

The old timing pointer will work fine they both point to the same position. I have compared and test fit each before.

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Members' Pics]
[Tech Articles]