Fordman75 Gearhead Posts: 234 From: Lonsdale, MN, 55046 Registered: Jun 2000
|
posted 04-18-2005 02:16 PM
I've got a 86 Mustang I'm swapping a 351W into. And I recenty got a Lincoln Mark VII given to me by a friend. He just wanted the engine and trany out of it. My question is will the rear diff and front brakes work on my 86 Mustang? The Lincoln has a 5 lug set up and 4 wheel disc brakes. So if they will fit the Mustang I'd like to swap them in.Thanks.
IP: Logged |
quick50stng Journeyman Posts: 70 From: Bethlehem,GA. USA Registered: Sep 2004
|
posted 04-19-2005 11:09 AM
I am unsure about the front Mark spindles fitting but you can use ford ranger 5 lug spindles and rotors. Go to www.stangparts.com under tech articles. They have a decent article on the 5 lug conversion.I know the rear will bolt directly in but is slightly wider than the mustang rear. Also the Mark has antilock breaking ring on the axles you may want to ditch the ABS and remove the ring.
IP: Logged |