Stock pushrods OK??? - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'79 to '93 -- The Fox Mustang

Stock pushrods OK???

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Stock pushrods OK???
Stang72 Gearhead Posts: 209 From: Arkel,Zuid-Holland,Holland Registered: Jan 2003	posted 09-02-2004 02:44 AM i have a 5.0 Thunderbird .. i'm gonna put World Windsor JR heads on it from my 306 thats currently in my '72 Mustang (thats gonna be exchanged for a 351C Boss) complete with guideplates and roller rockers.. are the stock Ford pushrods ok for the guideplates??? or do i have to reach in my wallet again??? greetz Ben IP: Logged
Kyle Gearhead Posts: 405 From: Sumner, WA Registered: Dec 2001	posted 09-02-2004 10:08 AM You're gonna have to reach for your wallet; you need hardened pushrods when using guideplates. IP: Logged
wildfire466 unregistered	posted 09-02-2004 11:03 AM Not all guide plates are created equal either. If the plates are solid type and not split you can run into rocker roller tip location alignment problems. You may even spend three hours or more just moving the rockers around reguardless of guide plates to get a good fit. ------------------ http://www.geocities.com/wildfire1mustang/ IP: Logged
Stang72 Gearhead Posts: 209 From: Arkel,Zuid-Holland,Holland Registered: Jan 2003	posted 09-02-2004 11:45 AM ok... thanx guys!!! IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]