Author
|
Topic: 2k rpms
|
CalSpecMustang Gearhead Posts: 185 From: kansas Registered: Oct 2003
|
posted 08-11-2004 09:08 AM
at 2,000 rpms I can take off in first gear, but if its any lower like 1,500 or around there my car stumbles and stalls. I think thats a little high dont you? Im afraid to burn my clutch is there anyway I can lower it?Its a 1993 5.0 LX 5 speed, it has an under drive pully on the Alternator if that matters. Anyways thanks in advance I wont respond till tomarrow sometime Im off to go camping!
IP: Logged |
wildfire466 unregistered
|
posted 08-11-2004 11:01 AM
I would think you will have to take it in to a shop and check for codes. Just off the top of my head it sounds like a dirty MAF Sensor. What happens is the fiber from the air filter sometimes get's on the sensor and will contaminate it. The sensor has tamper proof screws (Napa sells bits to remove the screws). I'd have the codes read first before messing with the sensor. To clean the sensor you will need a clean spray bottle of rubbing Alcohol and a cotton swab. Spray the sensor and very lightly wipe the wires. Some use carb cleaner but that will leave a residue on the wires.Onec ya get the codes read post what ya find. Les ------------------ http://www.geocities.com/wildfire1mustang/
IP: Logged |
73torinoqcode Gearhead Posts: 403 From: Buffalo,NY,USA Registered: Jun 2003
|
posted 08-11-2004 11:49 AM
Possibly the IAC with off idle stumble.
IP: Logged |
F551 Gearhead Posts: 247 From: Manitoba, Canada Registered: Nov 2000
|
posted 08-11-2004 11:18 PM
Yeah - I thought IAC or dirty throttle body.How does it idle in neutral? Maybe Throttle Position Sensor(?) ------------------ Fred 68 Mustang 500CID/Powerglide - "No Tubs" 86 Mustang GT Cobra
IP: Logged |
CalSpecMustang Gearhead Posts: 185 From: kansas Registered: Oct 2003
|
posted 08-12-2004 06:16 PM
It idles around 1k. Whats the IAC I just got my 5.0 so Im not use to all this stuff guys.
IP: Logged |
CalSpecMustang Gearhead Posts: 185 From: kansas Registered: Oct 2003
|
posted 08-13-2004 04:25 PM
Bump. Sorry guys I wanna be able to drive my car with out having to get it to 2k rpms.
IP: Logged |
73torinoqcode Gearhead Posts: 403 From: Buffalo,NY,USA Registered: Jun 2003
|
posted 08-13-2004 04:47 PM
Emailed You
IP: Logged |
CalSpecMustang Gearhead Posts: 185 From: kansas Registered: Oct 2003
|
posted 08-13-2004 05:10 PM
Thank you! Bill your my new hero!
IP: Logged |
73torinoqcode Gearhead Posts: 403 From: Buffalo,NY,USA Registered: Jun 2003
|
posted 08-13-2004 10:35 PM
Good luck I know how it is to want to get back up and running.
IP: Logged |