Distributor - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'79 to '93 -- The Fox Mustang

Distributor

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Distributor
bbjay351 Gearhead Posts: 223 From: DeSoto, Mo Us Registered: May 2004	posted 07-19-2004 07:10 PM Has anyone ever run into the problem of the distributor not sliding back into the motor? It's an 89 GT 302 all we did is change the heads and put the motor back together, now I can't get the distributor back in. It's like it's hitting something but I can't tell where it's hitting........ IP: Logged
capri man Gearhead Posts: 7221 From: doerun, ga. Registered: Nov 2000	posted 07-19-2004 08:22 PM its not lined up with the oil pump shaft. just push down on it and turn the motor a little and it should drop right in. ------------------ mike r racing is real everything else is just a game. 81 capri-302-7.33 @92mph 1/8 1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html IP: Logged
bbjay351 Gearhead Posts: 223 From: DeSoto, Mo Us Registered: May 2004	posted 07-20-2004 09:44 AM It worked out awsome, thanks for the help. We'll have it on the road tonight after some new exhaust IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]