|
Author
|
Topic: Whats it take to put a C4 in a fox body?
|
bud4660
Gearhead Posts: 528
From: Mesquite, Tx. M&M #2925
Registered: Apr 2003
|
posted 06-29-2004 04:14 PM
   
I have a friend wanting to do this. Is there a kit or do you have to piece it together?
Thanks for the help!!
Bud------------------
1967 GT Fastback S code, C6, 4:56, tubbed, 10 point cage.
http://www.allfordmustangs.com/forums/photopost/showgallery.php/cat/500/ppuser/12578 1998 GT Convert.(sold 11/29/03)
Mesh Grille, Air Silencer Trimmed
Automatic, 3:73 FRPP Gears, Mac Girdle, Moser Axles
Griggs Sub's, Welded/Plated Torque Boxes, Strut Tower Brace, Strange 10way Struts, MM HD lower control arms, Rear air bags
ProStars 15x10 w/295/50/15, 15x4 w/P195/75/15 and ARP Studs, 9/16" spacers
IP: Logged |
Moneymaker
Administrator Posts: 26813
From: Lyons, IL, USA
Registered: May 99
|
posted 06-29-2004 05:45 PM
E2 50 oz 157 tooth flywheel (if you use the small bell housing which I recomend)
A trans and converter.
Ranger neutral saftey switch SW-1745 makes everything work electrically.
A shifter (or my conversion shifter kit uses stock AOD unit)
Cut the crossmember mounting bushing tack welds, and slide the crossmember forward. Re-tack weld.
Hook up a cooler or use the factory unit.
Fox drive shaft works fine.
Done  ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
bud4660
Gearhead Posts: 528
From: Mesquite, Tx. M&M #2925
Registered: Apr 2003
|
posted 06-29-2004 05:55 PM
Thanks Alex!! I will pass that on and see what he wants to do.
IP: Logged |
wildfire466
unregistered
|
posted 06-29-2004 10:44 PM
A helpfull link to c-4 transmssionshttp://www.mustangcentral.net/tech/c4.html Les ------------------
http://www.geocities.com/wildfire1mustang/
IP: Logged |
bud4660
Gearhead Posts: 528
From: Mesquite, Tx. M&M #2925
Registered: Apr 2003
|
posted 06-30-2004 09:05 AM
Thanks Les!! I'll pass that on too... 
IP: Logged |
bud4660
Gearhead Posts: 528
From: Mesquite, Tx. M&M #2925
Registered: Apr 2003
|
posted 06-30-2004 03:58 PM
Now he wants to know if he needs a kickdown cable for the semi auto (normal) shifting valvebodies?
Thanks guys!!
Bud
IP: Logged |
Mustangsandmore Forums
