cams - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'79 to '93 -- The Fox Mustang

cams

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: cams
89stang Journeyman Posts: 2 From: Registered: May 2004	posted 05-19-2004 07:33 PM i was wondering if anyone knew if i can put a cam from a 351 cleveland in my 302 IP: Logged
capri man Gearhead Posts: 6652 From: doerun, ga. Registered: Nov 2000	posted 05-19-2004 08:13 PM nope!! a 351W will work fine though!! ------------------ mike r racing is real everything else is just a game. 81 capri-302-7.33 @92mph 1/8 1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html IP: Logged
wildfire466 unregistered	posted 05-19-2004 10:53 PM Re:89stang capri man's right; but what are you looking to do? What cam did you have in mind? Les ------------------ http://www.geocities.com/wildfire1mustang/ IP: Logged
89stang Journeyman Posts: 2 From: Registered: May 2004	posted 05-20-2004 03:03 PM well i got an 89 gt but i got a rod knock so i have a 88 cougar 302 that i was going to build into a low dough motor, and i have some 351 parts lying around so... any advice would be cool. ] quote: Originally posted by wildfire466: Re:89stang capri man's right; but what are you looking to do? What cam did you have in mind? Les IP: Logged
capri man Gearhead Posts: 6652 From: doerun, ga. Registered: Nov 2000	posted 05-20-2004 03:36 PM 89stang, the carb is about the only thing that i can think of that will interchange between a cleveland and a windsor. ------------------ mike r racing is real everything else is just a game. 81 capri-302-7.33 @92mph 1/8 1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html IP: Logged
bbjay351 Gearhead Posts: 165 From: DeSoto, Mo Us Registered: May 2004	posted 05-24-2004 11:44 PM The cleveland heads will fit the windsor motor with some drilling on the intake. that's how they made the boss 302 work. a 292H cam from comp works awsome for a street machine IP: Logged
Bo408 Journeyman Posts: 24 From: Registered: Aug 2004	posted 08-04-2004 02:34 AM quote: Originally posted by 89stang: i was wondering if anyone knew if i can put a cam from a 351 cleveland in my 302 What year? IP: Logged
Bo408 Journeyman Posts: 24 From: Registered: Aug 2004	posted 10-07-2004 12:15 PM 526-531 lift cam with a 290 duration... all roller, all forged internals... 373 gears steeda underdrive pullies, mac full length comp headers ram air intake 70mm throttle body 77mm maf all ported and polished intake manifold and heads it runs What's that? IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]