Author
|
Topic: driveshaft
|
Ronnie Carlisle Journeyman Posts: 10 From: Marietta, Ga. USA Registered: Aug 2002
|
posted 04-03-2003 11:27 AM
Is the driveshaft in fox body mustang the same, wheither it is a automatic or T5 at the front yoke? The parts place has two different u-joints. What is the difference?
IP: Logged |
Stewart Moderator Posts: 9155 From: Monterey, CA Mustangsandmore Member #437 Registered: Apr 2000
|
posted 04-10-2003 12:28 PM
Crap, I have no idea.Anyone? Alex? Rory? Stewart
IP: Logged |
JCQuinn@work Gearhead Posts: 388 From: Lakewood, CO, USA Registered: Jun 2001
|
posted 04-10-2003 02:48 PM
Measured from center of U-joint to center of u-joint. 1979 SROD 45.83", 1979 C-4 46.25", 80-81 C-4 46.25, 82 C-5 45.51, 82-83.5 SROD 45.68, 83.5-85 T-5 46.19, 83.5-85 AOD 45.75, 86-93 T-5 45.30, 86-93 AOD 45.70.These measurements are from "The Official Mustang 5.0 Tecnical Reference and Performance Guide 1979 - 1993". All 79-93 yokes are 1.21 dia. 28 tooth. 86-93 automatics have a damper collar around the yoke tube. The 1310 u-joint is used on all cars from 1979 to 1985 and on automatics from 86 to 93. Sticks from 86 to 93 used the 1330 u-joint. The 1330 is stronger. Same cource. John
IP: Logged | |