|
Author
|
Topic: 460 swap
|
Dreamweaver
Journeyman Posts: 4
From: Greencastle, PA USA
Registered: Oct 2002
|
posted 10-17-2002 08:31 AM
   
I am planning a 460 swap into my '85 GT. I need to swap my manual pump for an electric one. My current setup is a 302 making 270 hp on the dyno. What pump should I go with keeping in mind the future 460. Also, should I go with 1/2" fuel line or will 3/8" be o.k. for the 460? Thanks in advance.Jason
IP: Logged |
SteveLaRiviere
Administrator Posts: 26864
From: Saco, Maine
Registered: May 99
|
posted 10-18-2002 08:26 PM
Welcome to M&M.  assuming the 460 is stock, the stock pump and fuel line should work fine. ------------------
'70 Mustang Mach 1 - '72 Mustang Sprint - '94 F-150
IP: Logged |
Stewart
Moderator Posts: 8505
From: Monterey, CA Mustangsandmore Member #437
Registered: Apr 2000
|
posted 10-19-2002 12:17 PM
Heya Jason, like Steve said, welcome to M&M!I came across this page recently and thought it might be helpful. I haven't read the info contained within, but it may have what you need. http://members.tripod.com/tomak3/page4.html Scroll to about halfway down. Stewart
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
