|
Author
|
Topic: bumper?
|
bfxcomet
Gearhead Posts: 555
From: Port Alberni, B.C. , Canada
Registered: Mar 2001
|
posted 06-25-2002 05:46 PM
   
I was working on my t-bird trying to remove the bumper and bumper shocks and could not get the bumper shocks out. I removed the bolts to the bumper and 1 bolt that goes thru the frame am I missing something.
Roger------------------
65 comet project
84 T-bird
Made in CANADA built for speed
#1145
IP: Logged |
Moneymaker
Administrator Posts: 19611
From: Lyons, IL, USA
Registered: May 99
|
posted 06-26-2002 07:04 PM
Don't you have a BFH Roger?  ------------------
Alex Denysenko
Co-Administrator and Moderator/ non 65-66 Mustang owner sensitivity co-ordinator NHRA/IHRA/SRA member
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Part time secret agent license #0089
Professional Manwhore
The Barry of BarrysGrrl
IP: Logged |
bfxcomet
Gearhead Posts: 555
From: Port Alberni, B.C. , Canada
Registered: Mar 2001
|
posted 06-27-2002 03:44 AM
Hammers, I love my hammers I even named my favorite one Thor. 
Roger------------------
65 comet project
84 T-bird
Made in CANADA built for speed
#1145
IP: Logged |
smblk t-bolt
Journeyman Posts: 66
From: port alberni BC Canada
Registered: Apr 2002
|
posted 06-29-2002 05:18 AM
roger, i didnt think they'd let you into the demolition derby without a complete bumper assembly!  ron
IP: Logged |
bfxcomet
Gearhead Posts: 555
From: Port Alberni, B.C. , Canada
Registered: Mar 2001
|
posted 06-29-2002 09:16 PM
Bumper is out and cut up and at least 20lbs lighter, go to work tomorrow and make some aluminum brackets to replace the shocks.
Roger------------------
65 comet project
84 T-bird
Made in CANADA built for speed
#1145
IP: Logged |
stang106
Gearhead Posts: 734
From: God's Country!... Port Alberni B.C. Canada
Registered: Jul 2001
|
posted 07-01-2002 12:33 AM
Roger, you had better cut out another 10 pounds, I know which motor you are using!
Dave------------------
'70 ragtop Stang
351W - ready to race!
IP: Logged |
bfxcomet
Gearhead Posts: 555
From: Port Alberni, B.C. , Canada
Registered: Mar 2001
|
posted 07-01-2002 08:31 PM
Ok Dave I took the bumper to work and cut some more out of it and made some aluminum brackets to support the bumper.
Roger------------------
65 comet project
84 T-bird
Made in CANADA built for speed
#1145
IP: Logged |
Mustangsandmore Forums
UBBFriend: Email This Page to Someone! 
