Wheels - F100 and A model - Mustangsandmore Forum Archive

Brought to you in part by:

NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.

Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.

Mustangsandmore Forum Archive

Old Fords and Mercurys

Wheels - F100 and A model

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author

Topic: Wheels - F100 and A model

jww_289
Journeyman

Posts: 71
From: Victoria Australia
Registered: Feb 2006

posted 06-15-2006 06:45 PM

Just wondering if anybody knew if the stud pattern on A Model's was the same as F100's ??

TIA,
John......

------------------
1966 fastback
- 4v 289
- T10 4 speed
- Pony interior
JWW_289 Home Page

TomP
Gearhead

Posts: 6376
From: Delta BC Canada
Registered: Dec 99

posted 07-24-2006 04:41 PM

I believe they are 5 on 5 1/2" which was used on Ford trucks all the way up till 1997. That pattern is also used on many Jeeps, Suzuki Samurai and the dozens of clones, and some newer Dodge 1/2 tons, size of the center hole differs some.

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Ultimate Bulletin Board 5.47d

[Members' Pics]
[Tech Articles]