|
Author
|
Topic: Check out Mike's handiwork
|
SteveLaRiviere
Administrator Posts: 43152
From: Saco, Maine
Registered: May 99
|
posted 02-12-2004 04:48 PM
   
Here is a Peterbilt 377 A/E he just completed:http://mustangsandmore.50megs.com/Mike/KW_a.jpg http://mustangsandmore.50megs.com/Mike/KW_b.jpg http://mustangsandmore.50megs.com/Mike/KW_c.jpg http://mustangsandmore.50megs.com/Mike/KW_d.jpg http://mustangsandmore.50megs.com/Mike/KW_e.jpg http://mustangsandmore.50megs.com/Mike/KW_f.jpg http://mustangsandmore.50megs.com/Mike/KW_g.jpg http://mustangsandmore.50megs.com/Mike/KW_h.jpg http://mustangsandmore.50megs.com/Mike/KW_i.jpg http://mustangsandmore.50megs.com/Mike/KW_j.jpg http://mustangsandmore.50megs.com/Mike/KW_k.jpg http://mustangsandmore.50megs.com/Mike/KW_l.jpg ...and a '69 Torino Cobra he's working on: http://mustangsandmore.50megs.com/Mike/Torino_a.jpg http://mustangsandmore.50megs.com/Mike/Torino_b.jpg http://mustangsandmore.50megs.com/Mike/Torino_c.jpg http://mustangsandmore.50megs.com/Mike/Torino_d.jpg http://mustangsandmore.50megs.com/Mike/Torino_e.jpg http://mustangsandmore.50megs.com/Mike/Torino_f.jpg http://mustangsandmore.50megs.com/Mike/Torino_g.jpg
IP: Logged |
MLariviere
Moderator Posts: 3984
From: Biddeford,Me.USA
Registered: May 99
|
posted 03-05-2004 08:35 AM
Thanks for putting them up,Steve!  Right now I'm building a 7 car carrier to put with it. I think it's about 3/4 done. I'll send pics when it is. BTW,this will be a scratch built trailer. [This message has been edited by MLariviere (edited 03-05-2004).]
IP: Logged |
SteveLaRiviere
Administrator Posts: 43152
From: Saco, Maine
Registered: May 99
|
posted 03-05-2004 11:41 AM
Here's the trailer. Nice work, Mike!    ------------------
'70 Mustang Mach 1 351C 4V/FMX/3.25 Open
'70 Mustang Convertible 250 I6/3 speed/2.79 Open
'72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
IP: Logged |
MLariviere
Moderator Posts: 3984
From: Biddeford,Me.USA
Registered: May 99
|
posted 03-05-2004 09:01 PM
I've added alot since these pics. The trailer will hold die cast cars now,without sagging in the middle. I also cut the top back deck in half so I can get the cars on better. I am just building this off the top of my head. I also found some plastic banding with a diamond type pattern to use on the treads. I think I will paint it silver. BTW the Calypso Coral Boss'9 took a swan dive off the bench,and is now in 200 pieces.  I needed a parts car anyway.  [This message has been edited by MLariviere (edited 03-05-2004).]
IP: Logged |
mustangs68
Moderator Posts: 22320
From: Buckroe Beach Va MCA#39406 M&M #12 Member Mustang Club of Tidewater
Registered: May 99
|
posted 03-05-2004 09:18 PM
Mike that is excellent work!!Sam
IP: Logged |
SteveLaRiviere
Administrator Posts: 43152
From: Saco, Maine
Registered: May 99
|
posted 03-09-2004 03:16 PM
Next assignment for you, Mike, is to make one in 1:1 scale so we can take a shopping trip out west. ------------------
'70 Mustang Mach 1 351C 4V/FMX/3.25 Open
'70 Mustang Convertible 250 I6/3 speed/2.79 Open
'72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc
'94 F-150 XL 5.8L/E4OD/3.55 Limited Slip
IP: Logged |
MLariviere
Moderator Posts: 3984
From: Biddeford,Me.USA
Registered: May 99
|
posted 03-09-2004 11:39 PM
Thanks Sam! Steve,I don't think a plastic trailer will hold 7 Mustangs.
IP: Logged |
SteveLaRiviere
Administrator Posts: 43152
From: Saco, Maine
Registered: May 99
|
posted 03-11-2004 09:11 AM
Here's the latest pics:    
IP: Logged |
mellowyellow
Gearhead Posts: 6687
From: So. Fl.
Registered: Aug 2000
|
posted 03-17-2004 06:42 AM
Very nice work. If that Peterbilt was sitting on tarmac you would swear it was the real deal! Very impressive!!
IP: Logged |
MLariviere
Moderator Posts: 3984
From: Biddeford,Me.USA
Registered: May 99
|
posted 03-17-2004 09:06 PM
Thanks!
IP: Logged |
Mustangsandmore Forums
