|
Author
|
Topic: My 78 king-interior?
|
kingmustang79072
Journeyman Posts: 4
From: plainview,tx,usa
Registered: Dec 2005
|
posted 12-03-2005 06:15 PM
   
I bought my king from a guy in amarillo texas, it had been sitting in a field he says for 10 years, i just resently took out my carpet because mice had gotten under back seats and crapped all over,my seats are perfect black leather, ecxept for driver seat it has some cracks. I need to know were to go to get new carpet for this car and weather stripping for back hatch and t-tops? my car still has 13,000 miles on odometer, good i think, im bout to put 400 sm block with c-6 trans untill i can rebuild the original block and heads.------------------
austin chapman
IP: Logged |
missing link
Journeyman Posts: 75
From: kansas city mo
Registered: Nov 2004
|
posted 12-19-2005 09:19 PM
Mustangs Unlimited has your carpet and weatherstrips.
Dave
IP: Logged |
cobraii351
Journeyman Posts: 73
From: Altoona, PA
Registered: Jun 2000
|
posted 12-20-2005 07:13 AM
400sb and a C6? This isn't going to fit well with out cutting and beating things into place. The C6 will not fit the tunnel without modifications to the tunnel. If you are doing a 351W based motor that isn't going to fit all that well either. The Pass. exhaust is a big problem as the motor sits right of center. It your car but do you really want to cut up a 13K mile car?
IP: Logged |
John Holloway
Gearhead Posts: 1014
From: Romeoville Illinois
Registered: Jul 2000
|
posted 12-20-2005 11:48 PM
351C and C-6 fit great in My 1977 MustangII...The C-6 fit in the Stock location with the Stock Crossmember without banging or Cutting anything!
IP: Logged |
Mustangsandmore Forums
