Late model wheels - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'74 to '78 -- The Mustang II

Late model wheels

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Late model wheels
EDDIE-MII Journeyman Posts: 1 From: aurora ,Co, USA Registered: Aug 2005	posted 08-30-2005 12:44 AM I have a 78 fast back I was trying to put a set of ten holes from a 88 mustang they hit the upper control arm dose anyone have a fix? IP: Logged
SteveLaRiviere Administrator Posts: 44921 From: Saco, Maine Registered: May 99	posted 08-30-2005 05:40 PM You could get a set of wheel spacers, depending on how much backspacing you need to remove. I would use one thicker than 3/8" thick myself. Welcome to M&M. ------------------ '70 Mustang Mach 1 351C 4V/FMX/3.25 Open '70 Mustang Convertible 250 I6/3 speed/2.79 Open '72 Mustang Sprint Hardtop 351C 4V/FMX/4.30 Trac Loc '94 F-150 XL 5.8L/E4OD/3.55 Limited Slip '05 Mercury Sable LS 3.0L DOHC 24V Duratech V6 IP: Logged
jeffnoel Journeyman Posts: 9 From: Clovis, CA Registered: Jul 2002	posted 08-31-2005 04:34 PM You can pick up travel limiters from Mustangs Unlimited or 5.0 Resto. They are small spacers that clip on to the shafts of your R&P unit. Basically you loose a little of the turning radius because the wheels don't turn as far keeping them from contacting the control arm. ------------------ 78 Cobra II 92 Taurus L IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]