|
Author
|
Topic: need help 302 conversion
|
mike77mustangII
Journeyman Posts: 1
From: Bremerton, WA
Registered: Nov 2004
|
posted 11-23-2004 10:52 AM
   
I putting in a 77 302 in a 77 II. My problem is the trans is to far forward to bolt to the crossmember. Do I need a differant crossmember? If so from what? Or do I have to modify it. Is this caused by using a mustang GT bell housing instead of a standard bell housing?Mike [This message has been edited by mike77mustangII (edited 11-23-2004).]
IP: Logged |
COBRAII7678
Gearhead Posts: 117
From: Festus Mo U.S.A
Registered: Sep 2004
|
posted 11-25-2004 10:52 AM
quote:
Originally posted by mike77mustangII:
I putting in a 77 302 in a 77 II. My problem is the trans is to far forward to bolt to the crossmember. Do I need a differant crossmember? If so from what? Or do I have to modify it. Is this caused by using a mustang GT bell housing instead of a standard bell housing?Mike [
MIKE, check the tech section oo MUSTANGII.NET it has a article dealing with this. One more thing to think about is the GT bell housing is larger than theII and will not work with off the shelf headers.
IP: Logged |
Mustangsandmore Forums
