GT40P Head in a M2 - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'74 to '78 -- The Mustang II

GT40P Head in a M2

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: GT40P Head in a M2
COBRAII7678 Journeyman Posts: 71 From: Festus Mo U.S.A Registered: Sep 2004	posted 09-21-2004 08:56 PM Anyone used the GT40P heads in a II? Spark plugs seem to be an issue in some applications with available headers. IP: Logged
Davidr07 Journeyman Posts: 8 From: West Jordan, ut, usa Registered: Oct 2004	posted 10-04-2004 11:37 AM I have recently tried to get these heads to work but have run into the same problem, i have hedman headers and the passenger side seems to clear ok but on the driver side i will just buy a header flange and add it to the header so the 90 degree boots will work. i think i will still have to remove the headers to change the spark plugs IP: Logged
COBRAII7678 Journeyman Posts: 71 From: Festus Mo U.S.A Registered: Sep 2004	posted 10-04-2004 10:35 PM Thanks for the reply, guess I'll go the early 351w head route. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]