|
Author
|
Topic: 2.3 flexplates
|
Fordwiser
Gearhead Posts: 408
From: Metamora, Illinois
Registered: Dec 2000
|
posted 11-16-2002 04:19 PM
   
Were there changes in the balance weights over the years? Have a 87 Turbo Coupe motor I want to run a c4 behind. Want to know what year flex plates will work?
Thanks!
Roger
IP: Logged |
67coupe
Gearhead Posts: 490
From: dallas NC usa
Registered: Nov 2000
|
posted 12-09-2002 10:07 PM
if u find out let me know too im planning on using a c4 behind an 86 svo motor in the near future  ------------------
Josh
67 coupe with 351c
8.41 in the 1/8
1.90 60'
at 82.03 mph
94 Explorer
30 model A currently rustbucket
in process 67 convt with efi 5.0 and t5
IP: Logged |
Moneymaker
Administrator Posts: 26513
From: Lyons, IL, USA
Registered: May 99
|
posted 12-27-2002 11:22 AM
A4LD flexplate will work depending on who's converter you choose.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA National Record Holder '00, '01, & '02
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28
Professional Manwhore
The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
IIGood
Moderator Posts: 3510
From: Arnold, MD, USA
Registered: Jun 99
|
posted 12-27-2002 10:29 PM
Oh gosh, I don't know if it applies to the 4 cylinders...but I seem to remember hearing the V8 debacle of early vs. late. The V8s in the IIs had a 28 oz balanced plate, and after '79 or so, they were 50 oz. But that's for the 5.0s.------------------
Frank S.----MCA Member 40390
'99 Mustang coupe
'77 Ghia--"II Good"
'76 Cobra--project
IP: Logged |
67coupe
Gearhead Posts: 490
From: dallas NC usa
Registered: Nov 2000
|
posted 07-10-2004 12:51 PM
well after selling the car and now buying it back again im finally ready to put in the c4 so did u ever figure out whick torque converter and fly wheel to use i got a c4 bell just dont know what it came out of thanks if anyone can help ------------------
Josh
67 coupe with 351c (currently broke:( )
8.41 in the 1/8
1.90 60'
at 82.03 mph
94 Explorer
30 model A currently rustbucket
in process 67 convt with efi 5.0 and t5(now mostly complete and on the road legally)
IP: Logged |
67coupe
Gearhead Posts: 490
From: dallas NC usa
Registered: Nov 2000
|
posted 07-23-2004 01:07 AM
anyone got any ideas im planning on starting on this car in 2 weeks thanks if anyone knows------------------
Josh
67 coupe with 351c (currently broke:( )
8.41 in the 1/8
1.90 60'
at 82.03 mph
94 Explorer
30 model A currently rustbucket
in process 67 convt with efi 5.0 and t5(now mostly complete and on the road legally)
IP: Logged |
67coupe
Gearhead Posts: 490
From: dallas NC usa
Registered: Nov 2000
|
posted 08-02-2004 11:00 PM
can anyone help???????------------------
Josh
67 coupe with 351c (currently broke:( )
8.41 in the 1/8
1.90 60'
at 82.03 mph
94 Explorer
30 model A currently rustbucket
in process 67 convt with efi 5.0 and t5(now mostly complete and on the road legally)
IP: Logged |
Mustangsandmore Forums
