Sway Bar Help - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

'74 to '78 -- The Mustang II

Sway Bar Help

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Sway Bar Help
Pinto Guy Journeyman Posts: 1 From: Los Angeles Registered: Jul 2002	posted 07-13-2002 12:17 AM I am putting a M2 rear sway bar on my Pinto. The trouble I have is the end links that mount the bar to the frame. The ones on the donar car were broke on both sides. I know I can put some Heim Joints in their place but would like to get the stock rubber bushed ones. I found the fronts listed in a MOOG book but they had no listings for the rear. Is there an aftermarket supplier for these? I also go to many Pick A Parts in the Los Angeles area on the weekends. I see a few M2 from time to time. I will keep the list posted to what I find. IP: Logged
BROTHER-Rebel-OUTLAW Journeyman Posts: 12 From: Canada Registered: Jun 2002	posted 07-13-2002 09:56 PM Have you checed with the dealer, they would have to go into the micro-fiche to find it but they do have some pretty qweer things left over at the parts depos. You might have to blow the dust off it! Other than that, a NOS (New/Old Stock) supplier might help. Check the websites for NOS dealer listings. Good Luck ------------------ Keep the shiny side up and I'll see you in the FASTLANE BROTHER-Rebel-OUTLAW http://rebeloutlaw.tripod.ca/rebeloutlaw.html IP: Logged
SteveLaRiviere Administrator Posts: 43790 From: Saco, Maine Registered: May 99	posted 07-14-2002 03:37 PM You may find it takes the same as the front. ------------------ '70 Mustang Mach 1, '72 Mustang Sprint, '94 F-150 Pics MCA Member # 47773 IP: Logged
Marty Buth Journeyman Posts: 61 From: Registered: Jan 2001	posted 07-17-2002 09:06 AM Hey Pinto Guy, I need some jets for the Holley-Weber carburetor that came on the 2300 engines in the Pinto. I need jets in the 200 through 311 sizes. Got any?? I also need an alternator bracket. The kind that went on the manual steering. Marty Buth NHRA W/SA Pinto 3657 IP: Logged
IIblue74 Gearhead Posts: 163 From: memphis,tn Registered: Aug 2000	posted 07-21-2002 11:26 PM We had a guy over at Stangnet that made some plates so you could use Moog ends. Look over there for Vince he may still have a set or sell the plans g/l IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]