Brought to you in part by:
NOTICE! The old Mustangsandmore.com is a read-only archive.
Currently the Search function is inoperative, but we are working on the problem.
Please join us at our NEW Mustangsandmore.com forums located at this location.
Please notice this is a brand new message board, and you must re-register to gain access.
Topic: 66 tbird rear end size
From: Levittown, Pa
Registered: Dec 2003
posted 01-18-2006 06:56 PM
anybody know the length of a 66 thunderbird rear end and if it is an 8 inch. drivetrain consists of 390 auto. I have a feeling it is a 9 inch.
88 thunderbird TC 2.3L
Gillis at 18 psi, walbro 255 lph fuel pump, Kirban at 39 psi, 3.73 8.8" rear, rebuilt head, brand new IHI
66 mustang 200ci 3 speed
Holley weber two barrel, msd 6A, 3.5 gears, 3.03 v8 three speed trans.
68 Fairlane 289 w/ auto
rusting away motor is going in the mustang
79 f150 300 3 onda tree
awaiting a new transmission
From: Western Canada
Registered: Dec 2005
posted 01-18-2006 10:35 PM
It will be a 9", IIRC standard galaxy width.
Registered: Jan 2005
posted 01-18-2006 11:14 PM
Not sure of the exact years and models but there is also a 9 3/8 rear end that showed up in many a full size car.Looks like a nine inch till you pull it apart.The housing has a notch in it at the top and the top vertical rib on the carrier is curved instead of straight...
68 Fastback 427MR 4 spd.Deluxe interior,8000 tach,140 speedo,am/fm,tilt.
Contact Us | Mustangsandmore Front Page
Copyright 2006, Steve LaRiviere. All Rights Reserved.
Ultimate Bulletin Board 5.47d