Crankcase ventelation not working - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

Crankcase ventelation not working

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Crankcase ventelation not working
Dubz Gearhead Posts: 1890 From: Manitoba Canada Registered: Oct 2002	posted 08-20-2005 07:19 PM Blowing oil out both valve covers, dipstick tube ect. I have a PCV tube from the one valvecover to the carb, should i run one from the other side too? can't understand why i'd have so much pressure in there... IP: Logged
N266fords Gearhead Posts: 1652 From: Sierra Vista ,Az USA Registered: Apr 2003	posted 08-21-2005 04:48 PM that usaully means bad rings. Do a compression test or better yet aleak down test. Bruce IP: Logged
Hemikiller Gearhead Posts: 661 From: Killingworth, CT Registered: Feb 2002	posted 08-22-2005 12:07 AM You could also try a heavier oil. 10W40 stopped some oil issue I had in a car years ago. On 10W30 it leaked like a sieve, 10W40, no leaks, no blowing oil. IP: Logged
Dubz Gearhead Posts: 1890 From: Manitoba Canada Registered: Oct 2002	posted 08-22-2005 07:21 PM Might try the thicker oil, as the oil pressure drops off to low low when the engine gets up to temp. IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]