|
Author
|
Topic: strip off paint 9''housing
|
stroker man
Gearhead Posts: 332
From: Denville NJ USA
Registered: Mar 2002
|
posted 07-06-2005 07:25 PM
   
whats the fastest way to strip off old paint on my 9'' housing it needs to be striped and then repainted with por-15, whats the best way to do this i dont have a sand blaster, thanks.
IP: Logged |
Mark T 7724
Gearhead Posts: 240
From: Palmdale, CA
Registered: Nov 2000
|
posted 07-06-2005 08:59 PM
Have a Machine Shop Hot-Tank it.------------------
1964-1/2 Mustang SS/L 289 4-Speed, 10.537 @ 124.83. West Coast Money Maker Racing Team Member
IP: Logged |
steve'66
Gearhead Posts: 9489
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 07-06-2005 11:47 PM
Or use aircraft paint remover with Toluene. Just be carefull or grey matter might come out your ears... 
I stripped paint off planes as a side job in H.S., no big deal. But nowadays..... who knows, but I do know the stuff you can buy today is weak in comparison. You can always use a wire wheel on a angle grinder. My wife tried that on the 9" rear under our Dart and it got away from her and she was chasing the grinder trying to catch it. I yelled get away from it and pulled the plug.  SteveW
IP: Logged |
Poes Fords
Journeyman Posts: 92
From: Medford, OR USA
Registered: Oct 2004
|
posted 07-06-2005 11:49 PM
I have a local shot blaster, works great. Just got to make sure you remove all the shot material. It will remove anything. Jason.
IP: Logged |
Mustangsandmore Forums
