clevelands and blowers - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

clevelands and blowers

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: clevelands and blowers
23tbucket Journeyman Posts: 4 From: Cedar City Utah Registered: Nov 2004	posted 04-28-2005 10:47 PM Ive been thinking about putting a blower on my ported 2v cleveland and was wondering if anybody has experience as to who makes kits, blowers, inputs,... Any advice would be greatly appreciated. ------------------ IP: Logged
Mpcoluv Gearhead Posts: 1333 From: Charlotte NC usa Registered: Apr 2001	posted 04-29-2005 07:10 AM Blower Drive Service used to make a kit. IP: Logged
coupe3w Journeyman Posts: 83 From: Registered: Mar 2004	posted 04-29-2005 08:37 AM Paxton makes one for carbed engines blow thru type. I like this type for pakaging reasons, and looks vintage aka Shelby. ------------------ IP: Logged
23tbucket Journeyman Posts: 4 From: Cedar City Utah Registered: Nov 2004	posted 04-29-2005 09:18 AM this one is in a open hood 27 T coupe. thanks, I'll check out each one and see what look and performance I want. IP: Logged
73STANG Journeyman Posts: 82 From: Lincoln, NE Registered: Apr 2000	posted 05-04-2005 04:46 PM I have one on the Cleveland in my 73 Mach I. You can see some pictures of it under the members photos. I use the 4V open chamber heads with an intake built by Hampton Blowers. It is almost the same intake as the BDS. The drive system was also built by Hampton. The only distributor I could find that fit under the blower drive was a Mallory Unilite that is modified by BDS to fit. Patrick IP: Logged
Daniel Jones Gearhead Posts: 873 From: St. Louis, MO Registered: Aug 99	posted 05-04-2005 06:00 PM Newby in Australia makes (or made) a 6-71 blower manifold for 2V heads on a 351C. It's a high rise unit to clear the distributor. I don't think I've ever seen a dedicated 2V blower manifold in the States. Usually, you see a converted Offy 360 intake. The Offy 360 is basically a big plenum with a center divider. Dan Jones IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]