|
Author
|
Topic: Fuel line size for 302 and nitrous
|
Tom G
Gearhead Posts: 734
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 03-28-2005 02:20 PM
Need a recommendation for fuel line size for 302 650 BG carb 6500rpm limit and nitrous plate system?------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 BG CLAW Edelbrock 100 shot N2O Crane 1.7 rollers ceramic coated headers T5, cable clutch Flows X Pipe 3.89 9". Clearwater Aqua GT Clone Vintage wheel works 40 series 16X8 225 front 255/50 rear drag radials 13.25 @ 103mph 88 GT 5 spd 77k original miles Red and Silver
IP: Logged |
quick50stng
Journeyman Posts: 70
From: Bethlehem,GA. USA
Registered: Sep 2004
|
posted 03-28-2005 04:35 PM
Tom,3/8 line should be plenty.
IP: Logged |
Tom G
Gearhead Posts: 734
From: Bethlehem, Pa USA
Registered: Nov 2001
|
posted 03-28-2005 09:22 PM
Thanks. I have 1/2" aluminum but finding fittings is a pain. I just needed some confirmation.------------------
67 Mustang F/B 302 GT-40X FMS engine RPM Air Gap 650 BG CLAW Edelbrock 100 shot N2O Crane 1.7 rollers ceramic coated headers T5, cable clutch Flows X Pipe 3.89 9". Clearwater Aqua GT Clone Vintage wheel works 40 series 16X8 225 front 255/50 rear drag radials 13.25 @ 103mph 88 GT 5 spd 77k original miles Red and Silver
IP: Logged |
quick50stng
Journeyman Posts: 70
From: Bethlehem,GA. USA
Registered: Sep 2004
|
posted 03-29-2005 08:20 AM
Well, since you have the 1/2 line already might as well use it. I'm sure Earl's fittings will have what you need through Jegs or Summit Racing.
IP: Logged |