|
Author
|
Topic: cutting the floor
|
65stang289
Journeyman Posts: 64
From: concord (bay area), ca
Registered: Dec 2003
|
posted 03-13-2005 11:22 PM
   
I need to cut the floor for my t-5 conversion, what is the best way to do this? i was thinking about useing a sawzall. your helps is greatly appreciated. Thanks.
IP: Logged |
steve'66
Gearhead Posts: 9476
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 03-13-2005 11:28 PM
A nibbler is the best, but a sawzall or cutoff wheel will get the job done too.  SteveW
IP: Logged |
Billy Mac
Gearhead Posts: 857
From: S.Ga
Registered: Aug 2003
|
posted 03-13-2005 11:50 PM
Plasma cutter if one is available.....
IP: Logged |
Hukdunfonix
Journeyman Posts: 61
From: San Diego, Ca. USA!
Registered: Dec 2004
|
posted 03-14-2005 12:37 AM
oh yea, plasma cutter. fast, easy and looks good
IP: Logged |
whiteknight289
Gearhead Posts: 1391
From: Wheaton, IL, USA
Registered: Mar 2004
|
posted 03-14-2005 08:23 AM
Are other people finding it common to cut the floor? I've done 1/2 dozen of these conversions in the past and I don't remember having to cut the floor.
Scott
IP: Logged |
64coupe
Gearhead Posts: 131
From: Langhorne, Pennsylvania, United States of America
Registered: Sep 2002
|
posted 03-14-2005 08:44 PM
how come you have to cut it  i thought the t-5 will bolt in and work with the stock shifter hole?
IP: Logged |
bill haab
Gearhead Posts: 458
From: south bend in.
Registered: Oct 2002
|
posted 03-14-2005 09:28 PM
the tunnel brace is a b#tch to get out, look in tech at the bottom of m&m, there is a great read you should have a look at.
IP: Logged |
Mustangsandmore Forums
