|
Author
|
Topic: stock 302 rollers in a 351c
|
MOSS
Gearhead Posts: 102
From: Arlington, Tx, U.S.
Registered: Dec 2004
|
posted 12-25-2004 07:18 PM
   
Will the 5.0 stock roller lifter work in the 351c?
IP: Logged |
Moneymaker
Administrator Posts: 26813
From: Lyons, IL, USA
Registered: May 99
|
posted 12-25-2004 10:56 PM
They are the same diameter as any other SBF lifter so they will fit in the lifter bores.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
MOSS
Gearhead Posts: 102
From: Arlington, Tx, U.S.
Registered: Dec 2004
|
posted 12-26-2004 12:08 AM
Alex, what mech roller cam do you recommend for my application that I posted today. And what brand mech roller lifter with no oiling mods done to my 351c? Thanks
IP: Logged |
RogueS
Journeyman Posts: 72
From: Wichita, KS, USA
Registered: Oct 2004
|
posted 12-26-2004 01:46 AM
Are the lifter bores the same height and what about the retainers?
IP: Logged |
kid vishus
Gearhead Posts: 6405
From: middle of NC
Registered: Oct 2000
|
posted 12-26-2004 09:11 AM
quote:
Originally posted by MOSS:
And what brand mech roller lifter with no oiling mods done to my 351c? Thanks
Part of the advantage to running any mech lifter in a cleveland is so you CAN put restrictors in and limit the amount of oil to the top of the motor.
IP: Logged |
Mustangsandmore Forums
