|
Author
|
Topic: More SBF Headers
|
Bloose
Gearhead Posts: 621
From: Milwaukee, WI
Registered: Dec 2001
|
posted 12-14-2004 07:18 PM
   
Hey guys, I didn't want to high jack the thread about SBF headers and my question is just a but different so I thought I start a new thread.I have a couple of problems with my headers that are causing me to think about replacements. The biggest is the inability to get them to seal at the head. Add into that the tubes being to small for my AFR 185's as mentioned in the other thread. In the other thread someone mentioned Accufab, and at $500 that's really a pretty good price for what amounts to custom headers. The only problem is they are for Mustangs. I talked to someone at Accufab and he didn't know if they would fit into a '68 Farilane. I would guess there is more room in a Fairlan than a Mustang and the engine compartment is pretty simular. Does anyone know if headers for a '64 to '73 Mustang will work in a 1968 Fairlane? I'd really like to get some headers in the car that don't leak and fit the head. TIA,
B-loose
IP: Logged |
Moneymaker
Administrator Posts: 25883
From: Lyons, IL, USA
Registered: May 99
|
posted 12-14-2004 07:24 PM
They should fit fine.
I use a lot of 88300 Hedman headers and they are very generic.
I have installed them on everything from a early Mustang with a 351W to a 69 Galaxie with a 302.
SOoooo, I suspect that the Accufab Mustang headers should work just fine on your 68 Fairlane with a 302.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Bloose
Gearhead Posts: 621
From: Milwaukee, WI
Registered: Dec 2001
|
posted 12-14-2004 08:18 PM
Cool, now I just need to figure out where I'm going to come up with $500  .B-loose
IP: Logged | |
Mustangsandmore Forums
