Hooker 6208's/ AOD Clearance - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

Hooker 6208's/ AOD Clearance

profile | register | preferences | faq | search

next newest topic | next oldest topic

Author	Topic: Hooker 6208's/ AOD Clearance
Von Journeyman Posts: 81 From: Jay, OK Registered: Oct 2003	posted 12-13-2004 06:26 PM Has anybody used the Hooker 6208's with an AOD? Ive heard they will clear, but Id like to know for sure before spending the dough. Thanks IP: Logged
Dave_C Gearhead Posts: 968 From: Gadsden, Al Registered: Aug 99	posted 12-13-2004 06:37 PM They should. I used them with a C-6 and they cleared the C-6 bellhousing. The C-6 and AOD both use a 164 flexplate, so I would think they fit fit. David Cole ------------------ 557 BBF Powered, alcohol injected rear engine dragster. 4.90 @ 143 1/8 mile. 1.09 60'. I've got to be crazy to drive this thing. IP: Logged
Bloose Gearhead Posts: 621 From: Milwaukee, WI Registered: Dec 2001	posted 12-13-2004 06:48 PM Don't know about the Hookers but my Headmans did not. The collectors were pointed directly at the pan. I had to cut, angle, and weld the collectors to fit. I'm not sure if other headers would be the some or if the Headman were just a crappy fit. I can't see the Headmans fitting with any auto trans with the way the collectors were aimed but I never had any other trans in there so I'm not sure. B-loose IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]