Brought to you in part by:

.


JC Whitney clearance center!
  Mustangsandmore Forums
  Ford Racing
  Question about load ratings on wheels and launching?

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Question about load ratings on wheels and launching?
Dubz
Gearhead

Posts: 1718
From: Manitoba Canada
Registered: Oct 2002

posted 11-19-2004 02:42 AM     Click Here to See the Profile for Dubz   Click Here to Email Dubz     Edit/Delete Message   Reply w/Quote
Ok, found the keystone wheels i had will rub on the back if i go over a bump, they sit out way too far with a 2.5" backspacing compared to the stock 4", and the rims are an inch wider too.

Anyway, i'm looking at new wheels, now my car being a heavier car i'm concerned about load ratings, and what they meen. I was wondering in a drag racing application where there is good weight transfer, enough to unload the front and lift the tires off the ground, if this would excede the load rating capacity. Or is load rating a static rating, and not and instantanious (sp?) rating.

here's the prob, car weighs say 3800lbs, wheels rated at 1200lbs each, so between the two rears would be 2400lbs, quite a peice shy of cars weight. Even without lifting the front off the ground it could be enough of a transfer to break the wheels if it's an instant rating.

IP: Logged

Moneymaker
Administrator

Posts: 25883
From: Lyons, IL, USA
Registered: May 99

posted 11-19-2004 11:10 AM     Click Here to See the Profile for Moneymaker   Click Here to Email Moneymaker     Edit/Delete Message   Reply w/Quote
1200 x 4 = 4800

Unless your car only has two wheels, you shouldn't have a problem.


------------------
Alex Denysenko
Co-Administrator and Moderator

NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28

The Barry of BarrysGrrl

Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com

IP: Logged

Dubz
Gearhead

Posts: 1718
From: Manitoba Canada
Registered: Oct 2002

posted 11-19-2004 02:04 PM     Click Here to See the Profile for Dubz   Click Here to Email Dubz     Edit/Delete Message   Reply w/Quote
wheels up as your car does, it only has 2 wheels right?

IP: Logged

n2oMike
Gearhead

Posts: 2419
From: Spencer, WV
Registered: Jan 2001

posted 11-19-2004 03:38 PM     Click Here to See the Profile for n2oMike   Click Here to Email n2oMike     Edit/Delete Message   Reply w/Quote
Does you car have that same 'problem' as Alex's car???

------------------
Mike Burch
66 mustang real street
302 4-speed 289 heads
10.63 @ 129.3
http://www.geocities.com/carbedstangs/cmml_mburch.html
http://www.fortunecity.com/silverstone/healey/367
http://www.mustangworks.com/cgi-bin/moi-display.cgi?220

IP: Logged

Dubz
Gearhead

Posts: 1718
From: Manitoba Canada
Registered: Oct 2002

posted 11-19-2004 03:41 PM     Click Here to See the Profile for Dubz   Click Here to Email Dubz     Edit/Delete Message   Reply w/Quote
i'm hoping it will, and it wouldn't even need all the weight on the rears, only 63%

it's probably heavier than 63% on the front under hard braking, if not at rest.

[This message has been edited by Dubz (edited 11-19-2004).]

IP: Logged

All times are ET (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply
Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2005, Steve LaRiviere. All Rights Reserved.


Ultimate Bulletin Board 5.47d

Amazon Honor System Click Here to Pay Learn More

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]