|
Author
|
Topic: Edelbrock has AWESOME customer service!!!!
|
f100cleveland
Gearhead Posts: 361
From: St. James, MN
Registered: Sep 2004
|
posted 11-15-2004 08:10 PM
   
I just got off the phone with Edelbrock concerning the Fel Pro gasket not matching up to the Victor series waterpump. The guy told me that the pump needs its own gasket and you can only get it through them. I was thinkin this was gonna be one of them 10 dollar gaskets. NOPE. He is sending me two or three of them for free. Said I will have them by Friday at the latest. That just blows me away that a big company like Edelbrock will take the time to ship someone a special gasket to work with their product. Most companies wouldn't do that. ------------------
1982 Ford F100 2wd Shortbox. Powered by a 357 Cleveland w/ closed chamber 4v's. Full Roller c-6 trans and 4.86 geared Detroit Locker equipped 9" rear. www.ford-trucks.com/user_gallery/displayalbum.php?&albumid=13034
IP: Logged |
BLstangin
Gearhead Posts: 817
From: St. James, MN
Registered: Apr 2002
|
posted 11-15-2004 08:31 PM
Hey Dustin, glad you got the gasket deal worked out. Apparently Napa didn't have it. I might take that thermostat off your hands if you don't have a use for it, since it won't fit the cleveland. ------------------
1970 coupe restored with the help of my dad. 306 with 650 dp holley, Weiand Stealth intake, headers, mme custom roller cam, harland sharp roller rockers, kb pistons, 10.3:1 compression ratio, pertonix ignitor 2 with matched coil, lakewood bellhousing, 4-speed toploader, and 3.50 9" locker rear.
1986 f-150, 5.0, factory towing package with original c-6 trans
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 11-15-2004 09:05 PM
Good company with very good products.  ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
73torinoqcode
Gearhead Posts: 417
From: Buffalo,NY,USA
Registered: Jun 2003
|
posted 11-15-2004 09:22 PM
Auto Meter is also good. I had a problem with a line and compression fitting for my oil pressure gauge and they sent me a replacement for free and I had it in 2 days. There are a few good companies left out there.
IP: Logged | |
Mustangsandmore Forums
