|
Author
|
Topic: Tremec Yolk
|
SundanceKid
Gearhead Posts: 1273
From: UT
Registered: Feb 2001
|
posted 09-14-2004 01:28 PM
   
I'm trying to find a 1350 yolk for my Tremec 3550 trans. The yolk is the same spline count as a toploader or T5. I found a place that has a Ford part that is a 28 spline 1350 joint yolk. The question is the outside dimension for the seal surface measures 1.585". When I measure my toploader it measures 1.499" Would I be able to use this yolk on my trans? Anyone with a Tremec want to take the time to measure theirs?
IP: Logged |
n2oMike
Gearhead Posts: 2680
From: Spencer, WV
Registered: Jan 2001
|
posted 09-14-2004 04:00 PM
If it's the same as a C4/toploader yoke, Mark Williams Enterprizes makes one that's super strong. 28 spline, 1350 (ton truck) U-joint. I had to purchase one for my car after twisting the splines on several Spicer and Ford units. These hold up great!Good Luck! ------------------
Mike Burch
66 mustang real street
302 4-speed 289 heads
10.63 @ 129.3
http://www.geocities.com/carbedstangs/cmml_mburch.html
http://www.fortunecity.com/silverstone/healey/367
http://www.mustangworks.com/cgi-bin/moi-display.cgi?220
IP: Logged |
Mustangsandmore Forums
