|
Author
|
Topic: Harmonic Balancer..
|
Big D
Gearhead Posts: 5249
From: WELLS, NEVADA USA
Registered: Nov 2000
|
posted 06-29-2004 08:43 PM
   
The harmonic balancer I have on my 331 is off a (from what I've been told) 351W and the timing marks are on the opposite side of the balancer.. My old one was shot and the speed shop that did the internal balancing said they would find one and throw it on..We have TDC marked to my pointer,, but I need to get it degreed.. OPTIONS: Timing Tape,, Find the correct balancer,, Put an after market Pointer on opposite side.. What do you guys think.. Thanks.. ------------------
Don
6T6 Fastback
331 STROKER,, WC T-5
Royal Blue Metallic w/Ghost Flames
http://mustangsandmore.50megs.com/MembersPics/BigD.html
IP: Logged |
69 Sportsroof
Gearhead Posts: 1995
From: Valley, Alabama, USA
Registered: Mar 2002
|
posted 06-29-2004 09:20 PM
I'm looking into using timing tape. It should be much easier to see than the marks on the balancer.
IP: Logged |
steve'66
Gearhead Posts: 9104
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 06-29-2004 09:25 PM
DonFirst find the true TDC and mark it, then use timing tape and you'll be all set.  SteveW
IP: Logged |
Bloose
Gearhead Posts: 692
From: Milwaukee, WI
Registered: Dec 2001
|
posted 06-29-2004 09:49 PM
I used timing tape on mine.B-loose
IP: Logged |
Big D
Gearhead Posts: 5249
From: WELLS, NEVADA USA
Registered: Nov 2000
|
posted 06-30-2004 04:14 AM
 Timing Tape is the best bang for the $$$ Thanks Guys.. Sometimes I just need to be reassured.. No matter how simple the answer should be.. ------------------
Don
6T6 Fastback
331 STROKER,, WC T-5
Royal Blue Metallic w/Ghost Flames
http://mustangsandmore.50megs.com/MembersPics/BigD.html
IP: Logged |
Mustangsandmore Forums
