|
Author
|
Topic: Perma-Cool frame rail transmission coolers
|
mainer
Gearhead Posts: 157
From: Bryant Pond, Maine
Registered: Sep 2003
|
posted 05-26-2004 01:27 PM
   
Thinking of going with one of these 2 1/2 in. x 24 in. x 1 1/2 in tranny coolers. Too much of a short cut?thanks,
don
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 05-26-2004 03:52 PM
Any trans cooler is of a benifit.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
mainer
Gearhead Posts: 157
From: Bryant Pond, Maine
Registered: Sep 2003
|
posted 05-26-2004 05:41 PM
Thanks for the reply. Is it good enough for street/strip car with bigger tranny pan?I'm stuffing a big radiator in as it is and don't want to put a tranny cooler in front of it. The tranny coolers that are in the radiators are tiny, so I figure this was a step in the right direction but not as good as a full blown fan setup. don
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 05-26-2004 06:43 PM
Yes.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
jsracingbbf
Gearhead Posts: 2898
From: Batesville,MS. , U.S.A.
Registered: Mar 2002
|
posted 05-27-2004 08:53 AM
I run a frame rail Moroso on my drag car.
IP: Logged |
indyphil
Gearhead Posts: 2690
From: Senoia, G.A. USA
Registered: Jul 2002
|
posted 05-27-2004 09:51 AM
just a quick Q
what temp should the tranny fluid be for street/light strip use, and does anyone run a gauge?
thanks------------------
'68 coupe, '66 289 C code
engine, edel 600cfm carb, performer intake, dual exhaust http://www.geocities.com/ottouk_77/68mustang.htm
IP: Logged |
Mustangsandmore Forums
