|
Author
|
Topic: What size carb for my new set up?
|
70coupe
Gearhead Posts: 483
From: Toronto,Ontario,Canada
Registered: Aug 2000
|
posted 05-10-2004 08:57 AM
  
What size carb do you recommend for my new set up?351C 4bolt block .030 and hard blocked
Keith black 107's(flat top)
stock crank
Eagle H beam rods
Lunati .626/.636 with 249/[email protected] 106LC
4v CC heads,filled heat cross over
Hooker 1 7/8" headers
Holley strip dominator intake
Ferrea valves
Crane gold roller rockers
C4 tranny with 8" 5000 stall
4:11 gears with 28x10x15 slicks.
Should run a little deeper into the 11's than my old motor.
competition engineering ladder bars with floaters,racing seats and an eight point bar. ------------------
351c 4v clsd heads
60'1.580
1/8 [email protected]
1/4 [email protected]
IP: Logged |
ZEATER
Gearhead Posts: 177
From: Mount Pleasant,IA,USA
Registered: Aug 2001
|
posted 05-10-2004 10:23 AM
Try these guys.
http://www.pro-system.com/pjames011900.html
I've heard good things about them.
IP: Logged |
70coupe
Gearhead Posts: 483
From: Toronto,Ontario,Canada
Registered: Aug 2000
|
posted 05-10-2004 10:37 AM
Thanks, they sound very knowledgeable and they recommend my 750HP that I currenly have to be reworked.
Thanks.
IP: Logged |
MrXerox
Gearhead Posts: 348
From: Oklahoma City, Oklahoma
Registered: Nov 2000
|
posted 05-10-2004 10:44 AM
950HP for that. I have a similar combo on my cleveland and have had a 650dp, 750dp, 850dp on it in the past and nothing comes close to running as good as this 950hp. Made a world of difference. Dont just listen to me though, ask Kid or any of the other cleveland guys on here...
IP: Logged |
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 05-11-2004 03:04 AM
MrXerox is correct. Those high winding, well breathing clevelands like alot of fuel. Depending on how hard you are going to run it 1050 might not even be absurd to suggest!
IP: Logged |
Mustangsandmore Forums
