|
Author
|
Topic: 351W headers
|
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 05-08-2004 05:54 PM
   
Who makes headers for a 67 Mustang, auto trans, manual steering, with a 351 W. Which ones would you reccomend? Also might consider buying a set from someone it the price was right.
IP: Logged |
kid vishus
Gearhead Posts: 6220
From: middle of NC
Registered: Oct 2000
|
posted 05-08-2004 06:28 PM
Headers that fit a 69-70 will also fit a 67 (the engine bay is almost identical, if not exactly identical.)
IP: Logged |
Dave_C
Gearhead Posts: 994
From: Gadsden, Al
Registered: Aug 99
|
posted 05-08-2004 10:11 PM
I have used Hooker part #6208. Not cheap, but worth every penny. They fit. No denting, hammering, cussing, etc. You don't even have to jack the engine up to install them. They are made to fit a 351W in a 65 through 70 Mustang. They will work with a C-4, C-6, AOD or stick. Hedman also makes some. Bought a set once. The quality on that particular set was so bad I refused to install them. Sold them and bought the 6208's David Cole ------------------
557 BBF Powered, alcohol injected rear engine dragster. 4.90 @ 143 1/8 mile. 1.09 60'. I've got to be crazy to drive this thing.
IP: Logged |
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 05-08-2004 10:27 PM
Kid Vishus are you 100 percent sure on the 69-70 headers fitting? They are considerably cheaper, but I want to be sure, the motor is a 76 if that matters thanks.
IP: Logged | |
Mustangsandmore Forums
