|
Author
|
Topic: 351W questions
|
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 05-05-2004 12:09 AM
   
Does it matter if the motor came out of a car or truck? Will I have to change things to make a truck motor work? Its an 83 or 84 (E3 date code). Thanks
IP: Logged |
capri man
Gearhead Posts: 6652
From: doerun, ga.
Registered: Nov 2000
|
posted 05-05-2004 06:50 AM
what are you putting it in???------------------
mike r
racing is real
everything else is just a game.
81 capri-7.33 @92mph 1/8
1.54 60 ft. http://www.angelfire.com/ny5/billswebsite/pg06.html
IP: Logged |
steve'66
Gearhead Posts: 9104
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 05-05-2004 12:49 PM
It's a 28 oz imbalance engine, so it'll work with older 289/302 flexplate or flywheel. You'll probably need a new oil pan, depending again on what you're putting it into. Like Mikey said,SteveW
IP: Logged |
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 05-05-2004 11:22 PM
Its going into a 67 Mustang, I'm more worried about it bolting up to my tranny a C-4.
IP: Logged |
steve'66
Gearhead Posts: 9104
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 05-06-2004 12:45 AM
Don't worry about that. It'll bolt right up to your C-4 and use the same flex plate and torque converter too. 
It uses a different oilpan (front sump 351w) and it's deck height is taller but otherwise it's identical. SteveW
IP: Logged |
Mustangsandmore Forums
