|
Author
|
Topic: moser
|
stroker man
Gearhead Posts: 332
From: Denville NJ USA
Registered: Mar 2002
|
posted 04-30-2004 12:25 PM
   
talking to moser for my 69mach1 408w and they say i should go with 31 spline instead of there 28 spline, thinking of buying a whole 3rd member from them with 3.70 gears and 31 spline traction lock,$1365.00 for rear and $380.00 for axles, i have 3.50 posi with stock axles does this sound ok i like moser's stuff, anybody need a 3.50 posi rear, new stuff inside was rebuilt not long ago
IP: Logged |
steve'66
Gearhead Posts: 9489
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 04-30-2004 02:51 PM
That new Moser set-up would be great. Kinda pricey but you'd never have to worry about it.  Your old 28 splined 3rd member is valuable too, they are getting rare. Another option would be to get a 31 splined 3rd member from a pick-up truck with trac-lock. Good luck,SteveW
IP: Logged |
ZEATER
Gearhead Posts: 177
From: Mount Pleasant,IA,USA
Registered: Aug 2001
|
posted 04-30-2004 03:03 PM
Try here
http://www.davidkeetoploaders.com/thirdmembers.htmComplete third member with detroit soft locker for under $1,000.00. I have their third member and moser axles.
IP: Logged |
stroker man
Gearhead Posts: 332
From: Denville NJ USA
Registered: Mar 2002
|
posted 04-30-2004 03:47 PM
hey zeater how long did it take to get your 3rd member, what gears do they use, moser uses US gears under 1000 bucks seems good save a few bucks is it good stuff, thanks.
IP: Logged |
ZEATER
Gearhead Posts: 177
From: Mount Pleasant,IA,USA
Registered: Aug 2001
|
posted 04-30-2004 04:12 PM
I believe they use precision gears. Turn around was fairly quick but it was a while ago that I bought it. I also bought a top loader from him. I run 11's with slicks in a 69 mach and have not had one failure. I also street drive the car.David Kee is very easy to talk with. I would give him a call, talk about your options and then decide.
IP: Logged |
Mustangsandmore Forums
