mustang2 suspension - Mustangsandmore Forums

Brought to you in part by:

.

Mustangsandmore Forums

mustang2 suspension

profile | register | preferences | faq | search

UBBFriend: Email This Page to Someone!

next newest topic | next oldest topic

Author	Topic: mustang2 suspension
two89w Gearhead Posts: 242 From: sydney australia Registered: Sep 2002	posted 04-03-2004 03:54 AM I am looking to put a modular type engine in place of my 347,so I need to get rid of my shock towers in my 68. I was told I can run mustang 2 suspension. Has anybody done this or seen it done? I have never seen a mustang 2 suspension set up.Can any show me some pictures? IP: Logged
Billy Mac Gearhead Posts: 541 From: S.Ga Registered: Aug 2003	posted 04-03-2004 07:29 AM Its kinda easy to do away with the shock towers but still use the stock upper and lower a-arms..........remove the shock and spring, replace with a coil-over shock.....attach the coil-over to the LOWER arm....so it extends through the upper a-arm....and then fabricate tabs off of the frame to attach the top of the coil-over.......that way.....you can remove the shock towers and have more clearance in the engine bay............(btw)....this is BASICALLY what a Mustang 2 set up is like....only you don't actually remove anything but the stock shock and tower.....Good Luck!!! IP: Logged

All times are ET (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | Mustangsandmore Front Page

Copyright 2004, Steve LaRiviere. All Rights Reserved.

Ultimate Bulletin Board 5.47d

Amazon Honor System

[Acronyms][Calendar][Chat][Classifieds] [Members' Pics]

[ Mustangsandmore.com Bookstore] [ Smokin' Fords] [Tech Articles]