|
Author
|
Topic: C8TE heads
|
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 04-01-2004 10:51 PM
   
HELP!
I have a pretty good opportunity to buy a set of these heads cheap.The problem is I know absolutely nothing about them so any help would be appreciated. Also any idea what it would cost to have heads machined for say 1.94 intake valves and and 1.60 exhaust valves.
IP: Logged |
Moneymaker
Administrator Posts: 26813
From: Lyons, IL, USA
Registered: May 99
|
posted 04-02-2004 10:50 AM
What is a C8TE supposed to be?------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Mooney
Gearhead Posts: 1943
From: Marietta, Ga
Registered: Oct 2003
|
posted 04-02-2004 11:26 AM
Probably just a set of 68 Ford Truck heads. Not sure what their flow rates are or anything else along those lines though. Unless theres something special about 'em I dont know about you can pick them up around here at the local pick and pull all day for about 80-100.
IP: Logged |
67nightmare
Gearhead Posts: 118
From: rose hill, ks, usa
Registered: Mar 2004
|
posted 04-03-2004 08:29 PM
Alex,
I don't honestly know what that means or what it is supposed to be. I could get a set of uncracked C8TE heads for 25 bucks so I just wondered if they were any good, but at this point I've decided to give up on the 351W for now......LOL anyway I can buy a 302 for $300 with about 7500 miles on it. If anyone one else has a good 302 or 289 for that matter that they want around 500 for please contact me. I want something with low miles (less thank 60k). Recently rebuilt would be great. Thanks
IP: Logged |
Mooney
Gearhead Posts: 1943
From: Marietta, Ga
Registered: Oct 2003
|
posted 04-03-2004 10:57 PM
I'd keep an eye on e-bay, when I was looking for a 302 they had a 289 built to K-code specs solid cam and all for 500 bucks, lacking exhaust manifolds and pulleys, otherwise complete. Good luck to you!
IP: Logged |
Mustangsandmore Forums
