Mpcoluv Gearhead Posts: 1160 From: Charlotte NC usa Registered: Apr 2001
|
posted 04-01-2004 02:38 PM
Well I finally talked to my friend with the Pro Topline heads, and a flow bench. I will try to get the full flow chart, but I was told that the 200cc heads flowed 280cfm at .600" lift and 28" of pressure. The exhaust flowed 214cfm at .600" lift. This is pretty close to the advertised numbers. Soon there will be a dyno test I think. BTW the claims about ProTopline being bankrupt is very close to the truth. Apparently the upper management has been spending like a drunken sailor, although the company is making money (on paper). There is a buyout/bailout in the works I am told.
IP: Logged |