|
Author
|
Topic: Try-Y Hedders?
|
RPM289
Gearhead Posts: 136
From: Phenix City, AL
Registered: Feb 2002
|
posted 03-25-2004 04:38 AM
   
Who sells Try-Y hedders for GT40P heads in a 66 Mustang?------------------
Mike 66' Mustang,289,4 speed overdrive.
95' Lightning #2218
65' Mustang,Tubbed, Rear cage ladder bars / coil over's, 5.13:1 N-case 9in.31 spline, 302 toploader 4 speed.
IP: Logged |
rdinmv
Gearhead Posts: 139
From: orange county CA
Registered: Feb 2004
|
posted 03-25-2004 12:01 PM
central coast mustang
IP: Logged |
CHIPSBAD67
Gearhead Posts: 396
From: LOU,KY;USA
Registered: Sep 2003
|
posted 03-27-2004 11:02 PM
aint worth the money imo. ------------------
306, 4speed, 4.11's....best 1/8 mile 7.58 at 92mph with 1.72 60ft. PUMP GAS/NO ADDERS/STREET TIRES
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 03-27-2004 11:57 PM
They should be called Y-try headers.  SteveW
IP: Logged |
RPM289
Gearhead Posts: 136
From: Phenix City, AL
Registered: Feb 2002
|
posted 03-30-2004 11:47 AM
My friend that bought my old 351W Ranger was looking for a set to use with gt40p heads. When I built the truck I used Try - Y hedders so everything is made to fit with them. Not to mention they were 125 bucks compared to the 290 for custom hedders to fit the Ranger.------------------
Mike 66' Mustang,289,4 speed overdrive.
95' Lightning #2218
65' Mustang,Tubbed, Rear cage ladder bars / coil over's, 5.13:1 N-case 9in.31 spline, 302 toploader 4 speed.
IP: Logged |
Mustangsandmore Forums
