|
Author
|
Topic: 289 Adjustable Timing Pointer (Alex?)
|
Andy Johnson
Journeyman Posts: 22
From: Yukon, Ok USA
Registered: Aug 2001
|
posted 03-16-2004 06:00 PM
   
We are using a very lite BHJ balancer on our zero balanceed 302. The above balancer is for a 289 application (3 Bolt and 289 Timing Marks)and requires a 289 timing pointer instead of our 302 or 5.0 pointer. Anyone able to point us in the right direction. we can make a home made version if we have too. Thought maybe you 289 S/S guys could help us.
Thanks, Andy
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 03-16-2004 06:20 PM
Good balancer Andy. 
To the best of my knowledge, ATI is the only one who offers adjustable timing pointers for SBF's. They are very nice and very expensive.Alex ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Andy Johnson
Journeyman Posts: 22
From: Yukon, Ok USA
Registered: Aug 2001
|
posted 03-16-2004 09:12 PM
Alex did you make your own? I was looking at the ATI and the way the pointer is made. It appears as if it is only made for the right side of the motor. Please correct me if I am wrong but don't the 289's have their pointers on the drivers side?
Thanks again
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 03-16-2004 09:20 PM
I do make my own when neccesary Andy.Did you look at all of the ATI's?
They make 4 or 5 for FoMoCo small blocks. ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Andy Johnson
Journeyman Posts: 22
From: Yukon, Ok USA
Registered: Aug 2001
|
posted 03-16-2004 09:24 PM
I looked at the one they showed on the web. I will look into it tomorrow and let you know what I come up with.
Thanks Alex
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 03-16-2004 09:44 PM
918946 Timing Pointer, Adj., SBF SVO Block, B-Key Pos./ 11 Oclock, 3/8 in. Bolt Holes
918947 Timing Pointer, Adj., SBF SVO Block, C-Key Pos./ 10 Oclock, 3/8 in. Bolt Holes
918948 Timing Pointer, Adj., SBF OE.Block, B-Key Pos./ 11 Oclock, 5/16 in. Bolt Holes
918949 Timing Pointer, Adj., SBF OE.Block, C-Key Pos./ 10 Oclock, 5/16 in. Bolt Holes
------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
CometGT1974
Gearhead Posts: 412
From: Asheville, NC USA
Registered: Jan 2002
|
posted 03-17-2004 12:51 PM
I got my billet aluminum adjustable timing pointer from Reider Racing.
IP: Logged |
RaSMG
Journeyman Posts: 27
From: Central CA
Registered: Jun 2003
|
posted 03-17-2004 03:53 PM
Summit sells the new FRPP adjustable pointers .. 10 o clock or 11 oclock. JEGS sells their own brand, I think they're both pretty new.
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 03-17-2004 06:35 PM
FRPP
M6023B351
M6023C351
also expensive.------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
Strain Gang
Gearhead Posts: 223
From: Thor, Iowa
Registered: Mar 2003
|
posted 03-17-2004 10:14 PM
Andy, I just bought a Billet timing pointer for a SBF off Ebay for $35. A guy CNCs them himself and they are VERY high quality. If you are interested let me know and I will shoot you his email. Steve Strain.
IP: Logged |
Andy Johnson
Journeyman Posts: 22
From: Yukon, Ok USA
Registered: Aug 2001
|
posted 03-17-2004 11:24 PM
Does anyone know if the pointer has to be mounted on the drivers side old style or can it be mounted on the passenger side? Yes steve please send me that e-mail address to [email protected]
IP: Logged |
Mustangsandmore Forums
