|
Author
|
Topic: Can anyone give me some info on Erson valves?
|
70coupe
Gearhead Posts: 483
From: Toronto,Ontario,Canada
Registered: Aug 2000
|
posted 03-11-2004 01:55 PM
  
I need a new set of exhaust valves for my race motor that spins up to 7000rpm. This is the information that I have on them."The valve is a great choice for your high performance race engine. The valve is made from XH-428 stainless steel, with chrome stem and hardened valve tip. This race severe duty series valve is made from superior material, swirl polished and fully machined."------------------
351c 4v clsd heads
60'1.580
1/8 [email protected]
1/4 [email protected]
IP: Logged |
Moneymaker
Administrator Posts: 26811
From: Lyons, IL, USA
Registered: May 99
|
posted 03-11-2004 06:37 PM
Call them. They will sell you direct and have a toll free number.
Sig Erson products are high quality and some of the best kept secrets in the performance industry.  ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
70coupe
Gearhead Posts: 483
From: Toronto,Ontario,Canada
Registered: Aug 2000
|
posted 03-12-2004 07:26 PM
Erson, says they haven't sold valves in years and have no idea about them!
I'm assuming that the material XH-428 would be fine for up to 7000rpm as the manley rece flo valves are made of the same material.
Any more input would be appreciated.
IP: Logged |
Mustangsandmore Forums
