|
Author
|
Topic: Head gasket 1011-2 or 9333PT ?
|
jeffstar
Journeyman Posts: 93
From: Toronto, Ontario, Canada
Registered: Feb 2003
|
posted 03-04-2004 07:27 PM
   
Hi Does anyone have any comments as to which of these 2 Felpro head gaskets is better. This is for a 351W based 393 with World Sr. heads, 10.2:1 One note, this is going in a 65 Mustang so re-torqing the head bolts after it's been run, is next to impossible. Thanks
IP: Logged |
Dave_C
Gearhead Posts: 968
From: Gadsden, Al
Registered: Aug 99
|
posted 03-04-2004 08:00 PM
I ran those heads on a 383W stroker for years. When I bought the heads I called World Products to find out which gaskets. They told me to use Fel-Pro 1021. This is listed as being for a 351 SVO or 302 SVO. I was using a regular 69 351W block. They told me these gaskets matched up to the water passages better than the 1011.Don't know if that was true, but I never had any problems with them, even at 13:1 compression. Later,
David Cole
IP: Logged |
Strain Gang
Gearhead Posts: 212
From: Thor, Iowa
Registered: Mar 2003
|
posted 03-04-2004 08:06 PM
Alex sold us some Victor head gaskets for our Windsor. Check with him first. They seem like a little better gasket then the Fel Pros. Steve.
IP: Logged |
Moneymaker
Administrator Posts: 25883
From: Lyons, IL, USA
Registered: May 99
|
posted 03-04-2004 08:26 PM
Victor Reintz racing gaskets part # 3428SGNone better.
No brag, just fact! ------------------
Alex Denysenko
Co-Administrator and Moderator NHRA/IHRA/SRA member and licensed Superstock driver
MCA member# 53321
NHRA and IHRA SS/LA & SS/MA National Record Holder '00,'01,'02,'03,& '04
First SS/MA in the TENS!
IHRA division 5 Superstock Champion
Fleet of FoMoCo products including 88 ASC McLaren Mustang #28 The Barry of BarrysGrrl Quote #1: "I never met a magazine mechanic I liked."
Quote #2: "Make sure brain is in gear before engaging mouth!"
Quote #3: "If you can't run with the big dogs, stay on the porch!"
www.moneymakerracing.com
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 03-04-2004 10:15 PM
quote:
Originally posted by Moneymaker:
Victor Reintz racing gaskets part # 3428SGNone better.
No brag, just fact!
These gaskets are on our 408W and they are very good.  SteveW
IP: Logged |
Mustangsandmore Forums
