|
Author
|
Topic: Clevor swap
|
bushman
Journeyman Posts: 45
From: newberg, OR, USA
Registered: Feb 2004
|
posted 02-24-2004 10:57 PM
   
Can a clevor fit between the shock towers of my 66 coupe? This may seem dumb, but I have seen some conversion headers for clevelands and have no idea if any cutting is required. 
p.s. is there a chart anywhere that will help me decode some holley carbs I have sittin' around? Don't know what they are or how big.
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 02-24-2004 11:43 PM
Yeah it'll fit with a little massaging. SteveW
IP: Logged |
V8 Thumper
Gearhead Posts: 4377
From: Arizona
Registered: Dec 2001
|
posted 02-25-2004 07:19 AM
quote:
Originally posted by bushman:
p.s. is there a chart anywhere that will help me decode some holley carbs I have sittin' around? Don't know what they are or how big.
http://www.holley.com/HiOctn/ProdLine/CarbList.pdf
------------------
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle
http://mustangsandmore.50megs.com/V8Thumper.html
IP: Logged |
bushman
Journeyman Posts: 45
From: newberg, OR, USA
Registered: Feb 2004
|
posted 02-25-2004 09:15 PM
So how much is a "little massaging" ?
IP: Logged |
Mooney
Gearhead Posts: 1580
From: Marietta, Ga
Registered: Oct 2003
|
posted 02-25-2004 09:31 PM
Speaking of the Clevor swap.. I found this article and remember it being discussed here shortly about 2v cleveland heads on a 302.
Are the intakes still available for this setup?
http://www.jason.fletcher.net/tech/cleveland2v/cleveland2v.htm
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 02-25-2004 09:46 PM
quote:
Originally posted by bushman:
So how much is a "little massaging" ?
Nothing a BFH can't take care of.  SteveW
IP: Logged |
32valveGT350
Gearhead Posts: 124
From: Briz Vegas, QLD, Australia
Registered: May 2003
|
posted 02-26-2004 12:46 AM
You Mean a Brass Ford Hammer?? :P
IP: Logged |
Rustang
Gearhead Posts: 733
From: Clarion PA
Registered: Nov 2000
|
posted 02-26-2004 07:14 AM
quote:
Originally posted by 32valveGT350:
You Mean a Brass Ford Hammer?? :P
 
------------------
'68 mustang 351 clevor- 10.92@124
'67 Stang, 351W -11.18@118
'69 351C Torino-14.90@100
'78 Pickup 351W-15.56@88
'79 Pickup 460 ET=??
IP: Logged |
steve'66
Gearhead Posts: 8826
From: Sonoma,CA,USA
Registered: Mar 2000
|
posted 02-26-2004 10:50 PM
No, a Big Ford Hammer.My F-250 says Dad's BFT, I tell people it means Big Ford Truck too. SteveW
IP: Logged |
Mustangsandmore Forums
