|
Author
|
Topic: Axle lengths
|
68 S-code GT
Gearhead Posts: 2746
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 01-20-2004 07:39 AM
   
How do they measure sock axle lengths, Is it end to end or end to the bearing? On 67-70 Mustang the stock lengths are 31-1/8�� and 27-1/16��!
IP: Logged |
V8 Thumper
Gearhead Posts: 4413
From: Phoenix, Arizona
Registered: Dec 2001
|
posted 01-20-2004 08:08 AM
From the wheel flange to the end of the splines  ------------------
1965 GT coupe, 333ci aluminum headed/solid cammed stroker, four speed, 3.70:1 9" All Blue Oval, no blue bottle
http://mustangsandmore.50megs.com/V8Thumper.html
IP: Logged |
68 S-code GT
Gearhead Posts: 2746
From: Sayreville, NJ, US
Registered: Mar 2000
|
posted 01-20-2004 12:48 PM
Is that to the inside or 0utside flange edge?
IP: Logged |
bud4660
Gearhead Posts: 518
From: Mesquite, Tx. M&M #2925
Registered: Apr 2003
|
posted 01-20-2004 08:07 PM
Wheel side of the axle flange to the spline end. Or the side the drum goes against.
------------------
1967 GT Fastback S code, C6, 4:56, tubbed, 10 point cage. 1998 GT Convert.(sold 11/29/03)
Mesh Grille, Air Silencer Trimmed
Automatic, 3:73 FRPP Gears, Mac Girdle, Moser Axles
Griggs Sub's, Welded/Plated Torque Boxes, Strut Tower Brace, Strange 10way Struts, MM HD lower control arms, Rear air bags
ProStars 15x10 w/295/50/15, 15x4 w/P195/75/15 and ARP Studs, 9/16" spacers
IP: Logged | |
Mustangsandmore Forums
